5.3 Description of Function Codes 5.3.1 F codes (Fundamental functions)
Gain (F30, F60)
F30, and F60 allow you to adjust the output voltage and current within the range of 0 to 300%.
Bias (F59, F63)
F59 and F63 allow you to adjust the bias for the output voltage value and current value within the -100 to 0 to 100%
range.
The bias is applied after multiplying the gain.
The figure below shows the effect of setting a gain of 200% and bias of -100% with bipolar voltage output of 0 to
±10 V from terminal [FM1].
Terminal FM, output voltage
To Next Page
Loading...
