Fuji Electric FRENIC MEGA G2 Series - Page 71

2.2 Wiring
2-33
INSTALLATION AND WIRING
Chap 2
Digital input
[PLC]
Programmable
controller signal
power supply
(1) Connect the output signal power supply for the programmable controller.
(Rated voltage +24 VDC (power supply voltage fluctuation range: 20 to +27 VDC),
maximum 100 mA)
(2) The terminal can also be used as the power supply for loads connected to transistor
outputs.
Refer to the "Transistor output" section for details.