11.22 Built-in Option Card Types and Ports in Which They Can be Installed
11-122
Internal circuit configuration
Fig. 11.22-10 Internal circuit configuration
Relay output functions can be selected with the following function codes.
Table 11.22-41
RY option (Mode selection)
0: Linked to terminal [Y1] to
[Y4]
1: Set independently
0: Linked to terminal [Y1]
to [Y4]
RY1 output signal (port A)
The content is the same as that
for function codes E20 to E24.
Refer to Chapter 5 “FUNCTION
CODES”.
RY2 output signal (port A)
RY1 output signal (port B)
RY2 output signal (port B)
7: Motor overload early
warning
To Next Page
Loading...
