Fuji Electric FRENIC MEGA G2 Series - 3.3 Running Mode

3.3 Running Mode
3-5
OPERATION USING THE KEYPAD
Chap 3
3.3 Running Mode
3.3.1 Operating state monitor
In running mode, the items in Table 3.3-1 below can be monitored. The monitor items set with function code E43
are displayed immediately after turning the power on. Press the key to switch between monitor items.
Speed monitor
display
→
Output current
display
→
Power
consumption
display
....
Final monitor
item
By holding down the key, the display returns to the speed monitor display.
Table 3.3-1 Monitor items
Monitor item
Monitor
example
LED indication
Unit
Meaning of displayed value
Data for E43
Speed monitor
Function code E48 specifies what to be displayed on the LED monitor and LED
indicators.
0
Output frequency 1
50.00
●Hz 〇A 〇kW
Hz
Frequency (before slip compensation)
actually being output
(E48 = 0)
Output frequency 2
50.00
●Hz 〇A 〇kW
Hz
Frequency (after slip compensation)
actually being output
(E48 = 1)
Rerefernce
frequency
50.00
●Hz 〇A 〇kW
Hz
Reference frequency being set
(E48 = 2)
Motor rotation
speed
1500
●Hz ●A 〇kW
min
-1
P01
120
出力周波数(Hz)
(E48 = 3)
Load rotation speed
300.0
●Hz ●A 〇kW
min
-1
Output frequency (Hz) x E50/E39
(E48 = 4)
Feed speed
300.0
〇Hz ●A ●kW
m/min
Output frequency (Hz) x E50/E39
(E48 = 5)
Transport time for
specified length
50
〇Hz 〇A 〇kW
min
E50
Output frequency (Hz) × E39
(E48 = 6)
Speed (%)
50.0
〇Hz 〇A 〇kW
%
Output frequency (Hz)
Max. frequency
× 100
(E48 = 7)
Line speed set
value
1800.
〇Hz 〇A 〇kW
m/min
Line speed setting value after calculating
acceleration/deceleration with d168 and
d169 for feed speed set with E48 = 5
(E48=8)
Line speed output
value
1800.
〇Hz 〇A 〇kW
m/min
Roll frequency setting value compensated
with winding diameter calculation result for
line speed set with E48 = 5
(E48=9)
Output current
12.34
〇Hz ●A 〇kW
A
Current output from the inverter in RMS
3
Power consumption
10.25
〇Hz 〇A ●kW
kW
Input power to the inverter
9
Calculated torque *1
50
〇Hz 〇A 〇kW
%
Motor output torque in % (Calculated
value)
8
Output voltage *2
200V
〇Hz 〇A 〇kW
V
Output voltage (RMS) of the inverter
4
Power ON
Output frequency (Hz)
● ON, 〇 OFF