12.3 Performance
To access the Performance page, click the Status menu, and then click the Performance
tab.
The Performance page contains the following tabs:
l "Inline" on page 388
l "Ethernet" on page 389
l "RAID" on page 390
l "Fibre Channel" on page 391
l "CPU" on page 392
Inline
The Inline page allows you to view throughput performance for inline data flow. Inline
data flow includes deduplicated and non-deduplicated backup data as well as received
replication data.
To access the Inline page, on the Performance page, click the Inline tab (see "Inline Page"
on page 388).
Figure 270: Inline Page
Use the Inline page to display recent inline data flow activity in a dynamic graph:
l Select the amount of time to display in the Last list (1–24 hours).
l The horizontal axis displays time (in minutes).
l The vertical access displays inline throughput (0–2,000 MB/s).
The range represented by the Y-axis changes based on the maximum value,
increasing in 200 MB increments as needed.
l Each bar on the graph represents approximately 1 minute of time.
l Hold the cursor over a bar to display the value of the bar.
ETERNUS CS800 388
To Next Page
Loading...
