7 Remote Management
This chapter contains the following topics:
l "Remote Management Overview" on page 133
l "Accessing Remote Management" on page 133
l "The Remote Management Console" on page 137
7.1 Remote Management Overview
The ETERNUS CS800 provides a powerful Web-based user interface that allows you to
configure and manage the system from a remote workstation on the same network as the
ETERNUS CS800.
Use the ETERNUS CS800 remote management console to perform the following tasks:
l Set up the ETERNUS CS800 using guided procedures (see "Configuration Wizards" on
page 145).
l View important system information at a glance (see "Home Page" on page 185).
l Manage data replication activities (see "Replication" on page 363).
l Monitor hardware status and system performance (see "Status" on page 407).
l View administration alerts and resolve service tickets (see "Alerts" on page 433).
l Configure storage presentation, data replication, and system settings (see
"Configuration" on page 199).
l Run diagnostic tools and maintain the system (see "Utilities" on page 441).
7.2 Accessing Remote Management
Access the remote management console using a Web browser on a workstation that is on
the same network as the ETERNUS CS800.
Supported Browsers
Web browser software is not included with the ETERNUS CS800. You must obtain and
install it separately. The ETERNUS CS800 remote management console supports the
following Web browsers:
l Mozilla Firefox 17 or later
l Google Chrome 21 or later
l Microsoft Internet Explorer 9, 10, or 11
ETERNUS CS800 133
To Next Page
Loading...
