Fujitsu ETERNUS CS800 User Manual

3 Hardware Description
This chapter describes the hardware features and basic operation of the ETERNUS CS800
hardware, including:
l "Server" on page 43
l "Storage Modules" on page 61
l "Hard Drive Carrier" on page 74
l "Turning On and Shutting Down the System" on page 76
l "Locating the Serial Number" on page 77
This chapter applies to ETERNUS CS800 S6 hardware only. For an ETERNUS
CS800 S5 system see ETERNUS CS800 S5 User Guide. For an ETERNUS CS800
S4 system see ETERNUS CS800 S4 User Guide. For an ETERNUS CS800 S2/S3
system see ETERNUS CS800 S3 User Guide.
3.1 Server
The server systems used by ETERNUS CS800 S6 is PRIMERGY RX2540 M1 that provides
control for the ETERNUS CS800 S6 software (operating system and software applications).
All ETERNUS CS800 S6 systems have one server.
For detailed information on PRIMERGY RX2540 M1 see:
l FUJITSU Server PRIMERGY RX2540 M1
l FUJITSU Server PRIMERGY RX2540 M1 Data Sheet
3.1.1 Server Front View
This chapter describes the front view of the servers, including features and indicators.
Figure 7: ETERNUS CS800 Entry servers' front view
ETERNUS CS800 43

Fujitsu ETERNUS CS800 Specifications

General

Brand	Fujitsu
Model	ETERNUS CS800
Category	Storage
Language	English