14.3 Analyzer
Figure 286: Edit Healthcheck Page
2. Select the check box to enable the healthcheck.
Or clear the check box to disable the healthcheck.
3. Click Apply.
When healthchecks are run (manually or scheduled), only enabled healthchecks
are run.
CAUTION!
If a healthcheck fails when it is run, there may be a problem in the blockpool that could
cause replication or restore operations to fail. Contact Fujitsu Technology Solutions
customer support if a healthcheck fails.
14.3 Analyzer
The Analyzer page allows you to analyze the network and disk performance of the
ETERNUS CS800.
To access the Analyzer page, click the Utilities menu, and then click the Analyzer tab.
The Analyzer page contains the following tabs:
l "Network Analyzer" on page 447
l "Disk Analyzer" on page 448
446 ETERNUS CS800
To Next Page
Loading...
