8.4 OST Wizard
Step 6: Confirm
1. Review the settings you selected to make sure they are correct (see "VTL Wizard:
Confirm" on page 162). If necessary, click Previous to return to a previous step to make
changes.
2. To make changes to a VTL partition, media, or host access group you added, first select
the item and click Delete to delete it. Then click Previous to return to the appropriate
step and add a new item.
3. After you have confirmed all settings, click Finish. The wizard configures the
ETERNUS CS800 with the settings you selected.
Figure 110: VTL Wizard: Confirm
8.4 OST Wizard
The OST wizard provides guided assistance for configuring the ETERNUS CS800 to present
its storage as one or more OST (OpenStorage) storage servers for use with a backup
application. The wizard guides you through the process of adding one or more OST storage
servers, configuring LSUs (logical storage units), and adding OST users. The wizard also
provides a link for downloading and installing the OST Plug-in on your backup host.
Additional Information
l The OST Wizard is available in ETERNUS CS800 and Multi-Protocol configurations
only.
l If you plan to use Concurrent Optimized Duplication, you should complete the
Replication wizard before beginning the OST wizard (see "Replication Wizard" on page
169).
162 ETERNUS CS800
To Next Page
Loading...
Need help?
General