2.4 îîComponents ETERNUS CS800 S6 System
2.4.2 Scale
This version provides a midrange amount as well as fast network throughput and full data
storage facility. It includes the following features:
l 1 server unit with 2 CPUs (8 cores / 16 threads each) and 256GB RAM
l Backup capacity between 32 and 352TB (ETERNUS DX100 S3 with optionally up to 10
expansion modules, field upgradeable).
l 3 x 1GbE ports for NFS and CIFS (to the customer LAN)
l Optionally: 1 to 10 storage expansion modules, with 32TB usable capacity each.
l Optionally: 4 x 10GbE (factory installed option/field upgradeable on special release only)
l Optionally: 8 x 1GbE (factory installed option)
l Optionally: 4 x 8GbFC (always factory installed)
l Optionally: Hot Spares in ETERNUS DX100 S3 (factory enabled)
l The 1st storage expansion shelf of the DX100 S3 will be equipped with 12 x Hot
Spare disks.
l This will reduced the max. capacity to 320TB.
The Scale model uses an DX100 S3 storage array with large capacity, highly cost effective
Nearline SAS disks (Serial Attached SCSI). Twelve disks of 3.5'' size with a capacity of 4TB
each and a speed of 7,200 rpm are implemented to each module of the storage array. Always
six disks are building up a RAID 6 (4+2) disk group, i.e. there are two RAID 6 groups in each
storage module. In addition, sixteen SAS disks of size 2.5" with a capacity of 900GB each
and a speed of 10,000 rpm are implemented in the server. Two disks are reserved as hot
spare, the other ones are used by the operating system and to store the backup metadata.
32 ETERNUS CS800
To Next Page
Loading...
