ADS Share Permissions
To manage user access to CIFS shares when the ETERNUS CS800 is joined to a Windows
domain, use the MMC (Microsoft Management Console). Log onto the MMC on the domain
controller and access a share's properties to set share permissions for users.
In some cases, when you view file permissions on a Windows system, you will
not see the user and group information. Instead you will see the SID (security ID)
which appears as a series of numbers. This occurs when you move files (for
example, using a backup utility or DOS xcopy) from one system to another
system, and the user and group from the source system do not exist on the target
system.
Often users and groups are unique to a particular scope, such as a Windows
system or an ADS domain. As a result, some assigned permissions might not be
available on the target system because the associated user and group do not exist
there. However, common groups (for example, Administrators, Users, and
Everyone) are recognized on most Windows systems and domains.
10.2.4 Advanced Setting
The Advanced Setting page allows you to enable or disable advanced SMB settings.
To access the Advanced Setting page, on the NAS page, click the Advanced Setting tab
(see "Advanced Setting Page" on page 215).
Figure 145: Advanced Setting Page
To enable or disable advanced SMB settings:
ETERNUS CS800 215
10 Configuration
To Next Page
Loading...
