11.3 Receive NAS
The Receive NAS page allows you to manage incoming replication activity for NAS shares.
You can recover a replicated share on the target system if the source system is unavailable.
Once the source system becomes available, you can failback the share to make it available
on the source system again.
Before you can receive replicated shares, you must specify one or more
replication sources (see "Adding a Replication Target" on page 272).
To access the Receive NAS page, click the Replication menu, and then click the Receive
> NAS tab.
Tasks
Use the Receive NAS page to perform the following tasks:
l View received snapshots and recover, failback, or delete snapshots (see "Received
Snapshots" on page 381).
l Manage recovery jobs (see "Recovery Jobs" on page 386).
l Manage failback jobs (see "Failback Jobs" on page 387).
l Manage shares configured for Directory/File Based Replication (see "Directory/File
Based" on page 388).
Received Snapshots
The Received Snapshots page allows you to view and work with received snapshots. When
a replicated NAS share is received from a source system, it is saved as a snapshot. The
snapshot contains all of the data necessary to fully recover or failback the share to the point
in time when the snapshot was saved.
To access the Received Snapshots page, on the Receive NAS page, click the Received
Snapshots tab (see "Received Snapshots Page" on page 382).
ETERNUS CS800 381
11 Replication
To Next Page
Loading...
Need help?
General