Fujitsu ETERNUS CS800 - 11.4 Receive VTL

11.4 Receive VTL
Figure 247: Unpack Queue
The Unpack Queue displays the following information:
Barcode The barcode of the file or directory to be replicated.
State The replication state of the file or directory.
Click Refresh to update the statistics in the Unpack Queue. Click OK to return to the
Directory/File Based page.
11.4 Receive VTL
The Receive VTL page allows you to manage incoming replication activity for VTL partitions.
You can recover a replicated partition on the target system if the source system is
unavailable. Once the source system becomes available, you can failback the partition to
make it available on the source system again.
Before you can receive replicated partitions, you must specify one or more
replication sources (see "Adding a Replication Source" on page 278).
To access the Receive VTL page, click the Replication menu, and then click the Receive >
VTL tab.
Tasks
Use the Receive VTL page to perform the following tasks:
l View received snapshots and recover, failback, or delete snapshots (see "Received
Snapshots" on page 393).
l Manage recovery jobs (see "Recovery Jobs" on page 398).
l Manage failback jobs (see "Failback Jobs" on page 399).
392 ETERNUS CS800