Figure 246: Edit Share Settings Page
2. Select the Enable to receive Directory/File Based replication data check box to
enable Directory/File Based Replication for the share.
Or clear the Enable to receive Directory/File Based replication data check box to
disable Directory/File Based Replication for the share.
3. Enter a Sync ID in the box.
The Sync ID is used to identify the source share that will send replicated data to the
target partition. The Sync ID must be identical to the Sync ID of the source share on the
source system.
4. Select an Access option:
l Locked - The share is not allowed to receive new Directory/File Based Replication
data.
l Unlocked - The share is allowed to receive new Directory/File Replication data.
If a share configured for Directory/File Based Replication is locked on the
target system, synchronization jobs may fail on the source system.
5. Click Apply.
Unpack Queue
Use the Unpack Queue to view Directory/File Replication statistics for data received from
the source system.
To view the Unpack Queue, select a share and click View Unpack Queue (see "Unpack
Queue" on page 392).
ETERNUS CS800 391
11 Replication
To Next Page
Loading...
