10.4 OST Configuration
Figure 174: Edit Target Data IP Mapping
2. In the Target Replication IP box, enter the replication IP address to map the data IP
address to.
If you are editing a mapped IP address, you cannot change the target data IP
address.
3. Click Apply.
Deleting a Mapped IP Address
Delete a mapped IP address if traffic sent to the target data IP address no longer needs to be
routed to a replication IP address
To delete a mapped IP address, select the IP address and click Delete.
You can select multiple mapped IP addresses to delete at once.
10.4.7 ETERNUS CS800 Accent
Use the Accent page to enable or disable ETERNUS CS800 Accent. Fujitsu Technology
Solutions’s ETERNUS CS800 Accent software accelerates backups and reduces network
bandwidth requirements by distributing deduplication between the backup server and the
ETERNUS CS800. OST data sent from the media server to the ETERNUS CS800 can be
encrypted using AES (Advanced Encryption Standard) encryption methods.
To access the Accent page, on the OST page, click the Accent tab (see "Accent Page" on
page 269).
268 ETERNUS CS800
To Next Page
Loading...
