3.2 Storage Modules
3.2.5 ETERNUS DX100 S3 Expansion Modules - Front View
ETERNUS DX100 S3 expansion module is optional and goes just with Scale model
only.
ETERNUS DX100 S3 storage expansion modules are used in the ETERNUS CS800 S6
system to provide additional capacity (backup data storage). Each storage expansion module
contains 12 3.5-inch NL-SAS hard disk drives in the front (in the same way as the storage
base module) and two I/O modules as well aspower supplies (with fans) in the rear.
Status and Meanings of Each LED
Figure 40: Front view of the DX100 S3 drive enclosure
Figure 41: Operation panel of DX100 S3 (drive enclosure)
LED name LED status Description
POWER
LED
green DC power is supplied to the drive enclosure.
FAULT
LED
amber The drive enclosure is in error status.
70 ETERNUS CS800
To Next Page
Loading...
