2.3 What’s New in ETERNUS CS800 S6 with Software V3.2
l GUI for monitoring and management.
l Configuration Wizards provide guided assistance to help users configure key features of
the ETERNUS CS800, such as storage presentation and data replication. Each wizard
leads users step by step through the configuration process.
2.3 What’s New in ETERNUS CS800 S6 with Software V3.2
2.3.1 ETERNUS CS800 S6 Hardware
l Entry model consisting of a PRIMERGY RX2540 M1 server with one CPU and capacity
options of 8, 16 or 24 TB on internal disks.
l More powerful Entry model with a wider range of capacity options. This model consists
of a PRIMERGY RX2540 M1 server with two CPU’s and optionally up to three
ETERNUS JX40 S2 storage modules in addition to the internal disks. The provided
capacity varies between 8 and 120 TB.
l Scale model consisting of a PRIMERGY RX2540 M1 system and an ETERNUS DX100
S3 storage system. The provided capacity varies between 32 and 352 TB.
2.3.2 ETERNUS CS800 S6 V3.2 Software
l New blockpool with significant performance improvements in some cases.
l Support of Symantec NetBackup Accelerator.
l Access to root and service logins can be managed by the administrator now.
l Samba 4 and SMB3 - Samba 4 will auto-negotiate with the client up to SMB3.
2.4 Components ETERNUS CS800 S6 System
An ETERNUS CS800 S6 system consists of a server component, which is the PRIMERGY
RX2540 M1 server, and of storage components, which are up to three optional ETERNUS
JX40 S2 for ETERNUS CS800 S6 Entry and ETERNUS DX100 S3 for ETERNUS CS800
S6 Scale.
The following versions of the ETERNUS CS800 S6 are provided:
l "Entry" on page 31
l "Scale" on page 32
30 ETERNUS CS800
To Next Page
Loading...
