To delete a NAS share:
1. Select the share and click Delete.
You can select multiple shares to delete at once.
2. Click Yes to confirm the deletion.
10.2.2 Windows Domain
The Windows Domain page allows you to join the ETERNUS CS800 to a Windows
workgroup or a Windows domain using SMB. To use a NAS share configured for the CIFS
protocol on a Windows network, you must first join the ETERNUS CS800 to a workgroup or
a domain. After you join the ETERNUS CS800 to a workgroup or a domain, CIFS shares are
available for use on the Windows network.
To access the Windows Domain page, on the NAS page, click the Windows Domain tab
(see "Windows Domain Page" on page 207).
Figure 138: Windows Domain Page
ETERNUS CS800 207
10 Configuration
To Next Page
Loading...
