Fujitsu ETERNUS CS800 User Manual

Figure 205: AIS Smart Poll Page
Activate Smart Poll only if you are instructed to do so by a Fujitsu support specialist.
To activate Smart Poll:
1. From the AISConnect page, click the Smart Poll tab.
2. When instructed to do so by a Fujitsu support specialist, click Smart Poll.
10.9 System
The System page allows you to configure system settings for the ETERNUS CS800,
including network settings, system date and time, and security settings.
To access the System page, click the Configuration menu, and then click the System tab.
The System page contains the following tabs:
l "Network" on page 319
l "Date & Time" on page 334
l "Security" on page 337
l "FC Initiators and Targets" on page 358
10.9.1 Network
The Network page allows you to view and change network configuration information for the
ETERNUS CS800. The ETERNUS CS800 uses this information to connect to the network.
Network configuration information is entered during initial setup ETERNUS CS800. You
should consult your network administrator before making any changes to the network
settings.
ETERNUS CS800 319
10 Configuration

Fujitsu ETERNUS CS800 Specifications

General

Brand	Fujitsu
Model	ETERNUS CS800
Category	Storage
Language	English