10.9 System
CAUTION!
Changing the network configuration requires a system reboot to allow all system
services to function correctly. Changing the network configuration requires a system
reboot immediately after the changes are applied.
Rebooting the system can take several minutes. After the new network
configuration is saved, close your Web browser and wait 15 minutes before
logging in again. If you change the IP address that you use to log in to the system,
you will temporarily lose your connection to the remote management console.
Because of this, you might not see a confirmation page informing you that the new
settings have been saved.
To access the Network page, on the System page, click the Network tab (see "Network
Configuration" on page 321).
320 ETERNUS CS800
To Next Page
Loading...
