18 System Specifications S6
This chapter lists characteristics and specifications of the ETERNUS CS800 S6 product.
The characteristics and specifications are categorized as follows:
System Related Specifications
The following tables provide characteristics of the ETERNUS CS800 S6 system.
General Characteristics
NAS backup
target
NFS and/or CIFS mount point
128 shares maximum
OpenStorage
(OST)
Symantec Storage Servers and Logical Storage Units (LSUs) 100
storage servers maximum Support for Optimized Duplication
VTL l Scale with FC option: 64 partitions maximum, 256 virtual drives
maximum, 9000 virtual cartridges per partition
l Entry with FC option: 64 partitions maximum, 80 virtual drives
maximum, 9000 virtual cartridges per partition
Inline
Deduplication
Inline data flow provides deduplication with an optimal combination of
total system performance, manageability and value. Optionally shares or
partitions without deduplication enabled can be used to store data not
suitable for deduplication.
Replication Support for remote replication. Replication is asynchronous, one-to-one
or multiple-to-one configurations; shares in the same unit act as
replication source or target; units with shares acting as replication targets
can also support local backup.
Performance In-line data flow throughput up to 9 TB/h
Path-to-Tape
(optional for an
Entry and a
Scale system)
Direct tape creation without using media server or backup SAN Support
for OST Direct to Tape
Table 30: General Characteristics
ETERNUS CS800 489
To Next Page
Loading...
