To update the list with the latest information, click Refresh.
Mapping a Target IP Address
Add mapping for a target data IP address to route all network traffic sent to the address to the
specified replication IP address instead.
To map a target IP address:
1. Click Add.
The Add Target Data IP Mapping window displays (see "Add Target Data IP Mapping"
on page 267).
Figure 173: Add Target Data IP Mapping
2. Enter information about the mapping:
Target Data IP The target data IP address to map.
Target Replication IP The replication IP address to map the data IP address to.
3. Click Apply.
Editing a Mapped IP Address
Edit a mapped IP address to route traffic sent to the target data IP address to a different
replication IP address.
To edit a mapped IP address:
1. Select the mapped IP address and click Edit.
The Edit Target Data IP Mapping window displays (see "Edit Target Data IP Mapping"
on page 268).
ETERNUS CS800 267
10 Configuration
To Next Page
Loading...
