Network Analyzer
The Network Analyzer page allows you to analyze network performance by measuring
network throughput between the ETERNUS CS800 and another system (such as another
ETERNUS CS800 system).
To access the Network Analyzer page, on the Analyzer page, click the Network tab.
The Network Analyzer page contains the following tabs:
l "Performance" on page 447
l "Settings" on page 448
Performance
The Performance page allows you to perform network analysis with another system (the
target). You can also view results from the most recently run test
To access the Performance page, on the Network Analyzer page, click the Performance
tab (see "Performance Page" on page 447).
Figure 287: Performance Page
To perform network analysis:
1. In the Target IP Address box, enter the IP address of the system to perform network
analysis with.
The target system must have NetServer enabled (see "Settings" on page 448).
ETERNUS CS800 447
14 Utilities
To Next Page
Loading...
