Fujitsu ETERNUS CS800 - Page 192

9.5 Replication
Send Settings Information Description
Target System The IP address and replication status for each configured
replication target (up to two). Click to specify a replication
target (see "Replication Configuration" on page 270).
Status
l Ready - (Green) The system is ready to perform
replication.
l In Progress - (Blue) A replication job is currently in
progress.
l Queued - (Blue) A replication job is queued and will
continue when the system is ready.
l Partial - (Yellow) A replication job was partially
completed. Generate a replication report to see the files
that were not replicated (see "Reports" on page 406).
l Manually Paused - (Yellow) Replication was manually
paused. To resume replication, click Resume.
l System Paused - (Yellow) The system has
automatically paused replication due to a problem, for
example, low disk space or a problem on the target
system.
To see more information about the problem that
occurred, click Admin at the top of the remote
management console to view administration alerts (see
"Admin Alerts" on page 433). You may also need to
view alerts on the target. In addition, make sure that the
system is an allowed replication source on the target
(see "Replication Configuration" on page 270).
l Failed - (Red) A replication job was not completed.
l Internal Error - (Red) An error occurred during
replication.
192 ETERNUS CS800