Fujitsu ETERNUS CS800 - Page 196

9.6 Current Activity
Current
Activity
Information
Description
OST Service
(NAS and
Multi-Protocol
configuration
only)
The status of the OST service. OST settings can be configured in Ready,
Stopped, or Verifying state. The OST server is available for backup only in
Ready state.
Status
Inline (OpDup) - The inline data flow throughput (in MB/s). Inline data flow
represents the original, native size of the data protected by the ETERNUS
CS800.
Ethernet In (OpDup) - The amount of data received by all Ethernet ports (in
MB/s). This amount represents the reduced size of the data protected by the
ETERNUS CS800 (after deduplication and compression on the media
servers).
OpDup Bandwidth Reduction - The percentage by which network
bandwidth utilization was reduced by using Optimized Duplication.
Inline (Accent) - The inline data flow throughput (in MB/s). Inline data flow
represents the original, native size of the data protected by the ETERNUS
CS800.
Ethernet In (Accent) - The amount of data received by all Ethernet ports (in
MB/s). This amount represents the reduced size of the data protected by the
ETERNUS CS800 (after deduplication and compression on the media
servers).
Accent Bandwidth Reduction - The percentage by which network
bandwidth utilization was reduced by enabling Accent.
Space
Reclamation
The status of space reclamation (Not running or Percent complete). Click
to start or stop space reclamation (see "Space Reclamation" on page 449).
Compaction The status of space reclamation (Not running or Running).
Healthchecks The status of healthchecks (Not running or Percent complete). Click to
start or stop space healthchecks (see"Healthchecks" on page 443).
To view or modify scheduled system activity, click Current Schedules (see "Scheduler" on
page 286).
196 ETERNUS CS800