recommends using the same NTP server for the ETERNUS CS800 and the ADS server to
keep them synchronized.
To join a Windows domain:
1. Enter the following information about the Windows domain:
Domain Type Select Active Directory.
Domain/Workgroup Name Enter the domain name.
Primary Domain Controller Select an option for the Primary Domain
Controller (PDC):
l Use DNS Discovery - Discover the PDC
automatically.
l Specify Address - Enter the fully qualified
name or the IP address of the PDC.
Organization Unit (Optional) Enter the name of the organizational
unit in the domain.
The ETERNUS CS800 will become a member of
this organization.
Administrator Name Enter Administrator or any user that has the
right to join the domain.
By default, any user belonging to the
Administrators group or the Domain Admins
group has the right to join the domain. In addition,
any user can join the domain if they are
specifically delegated this right by a member of
the Administrators group.
Administrator Password Enter the password for the user entered above.
2. Click Apply.
When the system is joined to the Active Directory domain, share security is
managed by the MMC (Microsoft Management Console) that is running on the
domain controller. By default, when a CIFS share is created, the default security
setting allows access for all users. Any access restrictions on individual users
must be managed from the MMC.
ETERNUS CS800 209
10 Configuration
To Next Page
Loading...
