10.3 VTL Configuration
Figure 147: Add VTL Partition & Replication Settings Page
2. Under Partition Settings, enter information about the partition:
Name Enter the name of the VTL partition.
Library Model Select the library model emulated by the partition. The
library model determines the inquiry string returned to the
host by the ETERNUS CS800. (The library model does
not restrict the number of slots or drives in a partition
because library emulation is not a representation of a
physical library.)
The following library models are available:
l Fujitsu CS-TL
l ADIC Scalar 100, ADIC Scalar i2000, or ADIC
Scalar i500
l ADIC Pathlight VX
Number of Storage Slots Enter the number of storage slots in the partition (up to
9,000).
One I/E slot is created for each storage slot up to a
maximum of 240 I/E slots.
220 ETERNUS CS800
To Next Page
Loading...
