Fujitsu ETERNUS CS800 - Page 24

1.2 Important Information
This saves resources and thus reduces the harm done to the environment.
Energy-saving Information
Devices that do not need to be constantly switched on should be switched off until they are
needed as well as during long breaks and after completion of work.
Packaging Information
Do not throw away the packaging. You may need it later for transporting the system. If
possible, the equipment should only be transported in its original packaging.
Information on handling consumables
Please dispose of printer consumables and batteries in accordance with the applicable
national regulations.
In accordance with EU directives, batteries must not be disposed of with unsorted domestic
waste. They can be returned free of charge to the manufacturer, dealer or an authorized agent
for recycling or disposal.
All batteries containing pollutants are marked with a symbol (a crossed-out garbage can).
They are also marked with the chemical symbol for the heavy metal that causes them to be
categorized as containing pollutants:
Cd Cadmium
Hg Mercury
Pb Lead
Labels on plastic casing parts
Please avoid sticking your own labels on plastic parts wherever possible, since this makes it
difficult to recycle them.
Returns, recycling and disposal
The device must not be disposed of with domestic waste. This device is
labeled in compliance with European directive 2002/96/EC on waste
electrical and electronic equipment (WEEE).
This directive sets the framework for returning and recycling used
equipment and is valid across the EU. When returning your used device,
please use the return and collection systems available to you. Further
information can be found at http://www.ts.fujitsu.com/recycling
24 ETERNUS CS800