EasyManua.ls Logo

Fujitsu ETERNUS CS800 - Page 249

Fujitsu ETERNUS CS800
604 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specific
Capacity
Select this option to specify the physical capacity of the LSU, and then
enter the following information.
l LSU Name - Enter the name of the LSU.
l Physical Capacity - Enter the physical capacity of the LSU (1 to
1048576 GB).
Fujitsu Technology Solutions recommends setting LSUs to maximum
size (1048576 GB) because spanning them on a backup is not
possible.
5. (Optional) In the Description box, enter a brief description of the LSU.
6. (Optional) Select the Enable Automatic Image Replication check box to automatically
replicate (duplicate) data on the LSU to a remote LSU on another ETERNUS CS800.
Automatic Image Replication (AIR) is disabled by default. If enabled, data on an LSU is
automatically replicated to a remote LSU that resides on a ETERNUS CS800 in a
different NetBackup domain. The timing of the duplication, as well as the backup images
that are duplicated, are determined by the storage lifecycle policies (SLPs) configured in
NetBackup.
OST AIR requires NetBackup 7.1 or higher. For information about configuring
NetBackup for Automatic Image Replication, see the ETERNUS CS800 NetBackup and
Backup Exec OST Configuration Guide.
You must configure at least one remote user before you can enable Automatic
Image Replication (see "Manage Remote Users" on page 261).
7. If Automatic Image Replication is enabled, select the replication target you want to
replicate images to. (You can select only a single target.) When images are replicated,
data will be sent to the selected target.
8. If Automatic Image Replication is enabled, specify the following information:
Remote
Storage
Server
Name
The name of the remote storage server (on the target ETERNUS CS800) to
replicate data to. The source ETERNUS CS800 and target ETERNUS
CS800 must reside in different NetBackup domains.
To configure the target ETERNUS CS800, see "Replication Send" on
page 371.
Remote
LSU
Name
The name of the LSU in the remote storage server that will receive the
replicated data.
ETERNUS CS800 249
10 Configuration

Table of Contents

Other manuals for Fujitsu ETERNUS CS800

Related product manuals