Fujitsu ETERNUS CS800 - Page 256

10.4 OST Configuration
5. If Automatic Image Replication is enabled, select the replication target you want to
replicate images to. (You can select only a single target.) When images are replicated,
data will be sent to the selected target.
6. If Automatic Image Replication is enabled, specify the following information:
Remote
Storage
Server
Name
The name of the remote storage server (on the target ETERNUS CS800) to
replicate data to. The source ETERNUS CS800 and target ETERNUS
CS800 must reside in different NetBackup domains.
To configure the target ETERNUS CS800, see "Replication Send" on
page 371.
Remote
LSU
Name
The name of the LSU in the remote storage server that will receive the
replicated data.
Remote
User
The OST user credentials to use for authentication on the remote (target)
ETERNUS CS800. The selected remote user must match a local user on the
Configuration > OST > Manage Users page on the target ETERNUS
CS800 (see "Manage Users" on page 259).
7. Click Apply.
Editing an LSU
Edit an LSU to change its capacity, description, or automatic image replication settings.
To edit an LSU:
1. Select the LSU and click Edit.
The Edit Logical Storage Unit page displays (see "Edit Logical Storage Unit Page" on
page 257).
256 ETERNUS CS800