EasyManua.ls Logo

Fujitsu ETERNUS CS800 - Page 323

Fujitsu ETERNUS CS800
604 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 207: Network Page: General
When entering IP addresses, never use an address that is in a reserved IP
address range. To see a list of reserved IP address ranges, click the quick tip icon
[?] located near the IP address field.
Hostname The hostname of the ETERNUS CS800.
The Hostname cannot be blank and must contain only letters
[A–Z, az ], numbers [0–9 ], and hyphens [- ].
Default
Gateway
The default gateway IP address.
Specifying a default gateway is optional if all access is local to a particular
subnet. For example, if the ETERNUS CS800 and all of its clients are on
the same subnet, you do not need to specify a default gateway.
CAUTION!
Specifying a default gateway is required to enable connectivity with
all subnets other than those that the ETERNUS CS800 is directly
connected to. For example, if the ETERNUS CS800 and its clients
are on different subnets, or you are using an external NTP server,
you must specify a default gateway.
DNS Suffix
Search List
(Optional) The domain list to search when resolving domain names.
The list may be either a single domain name or a comma-separated list of
up to 6 domain names. The first domain name listed is used as the local
domain. Domain names must contain only letters [A–Z, a–z ], numbers [
0–9 ], dots [. ], and hyphens [- ].
Primary,
Secondary,
and Tertiary
DNS IP
Address
(Optional) The IP addresses of up to three DNS servers used to resolve
domain names and translate them into IP addresses.
You must specify a DNS IP address if you plan to use hostname
format when configuring an NTP time server, outgoing e-mail server,
replication sources and targets, and other information.
ETERNUS CS800 323
10 Configuration

Table of Contents

Other manuals for Fujitsu ETERNUS CS800

Related product manuals