10.9 System
Figure 225: Delete Public Key Page
c. Click Yes.
The "Successfully performed Security action" message appears.
d. Click OK.
The key is removed from the Available SSH Public Keys table.
3. In addition to configuring SSH authentication, the SSH service account may also be
configured with password authentication.
l Select the Allow login with password check box to enable a password on CLI
service account
l Clear the Allow login with password check box to disable a password on CLI
service account
Enter the following information:
New Password Enter the new password.
Confirm New Password Enter the new password again to confirm it.
Additional Information
l Passwords can be up to 20 characters. Alphanumeric characters and special
characters are allowed.
l For accounts enabled with both SSH and password authentication, the ETERNUS
CS800 system will first attempt SSH authentication. If there are no keys defined or
no client key matches, the ETERNUS CS800 system will fall back to password
authentication.
4. Click Apply.
350 ETERNUS CS800
To Next Page
Loading...
