Figure 291: Secure Shred Page
To securely erase data on the ETERNUS CS800:
1. Delete the data you want to securely erase:
l Delete files on NAS shares, or delete the shares (see "NAS Configuration" on page
200).
l Delete backup images on OST logical storage units (LSUs), or delete the LSUs and
storage servers (see "OST Configuration" on page 241).
l Recycle (erase) tape cartridges on VTL partitions, or delete the partitions (see " VTL
Configuration" on page 216).
2. Run space reclamation from the Utilities > Space Reclamation page (see "Space
Reclamation" on page 449).
3. Make sure all replication and backup jobs are completed (see "Replication" on page 363).
4. On the Secure Shred page, click Start Shred.
A warning message displays.
5. Click Yes.
The system reboots and begins the secure shred process. This process can take
multiple days to complete.
6. To check the status of secure shred, log onto the ETERNUS CS800 to view the limited
Secure Shred Mode interface (see "Secure Shred Mode Interface" on page 454).
l The Secure File Shred Log displays details about the secure shred progress. Click
Hide to hide the log.
ETERNUS CS800 453
14 Utilities
To Next Page
Loading...
