Item Indicator Status Description
D Global Error
indicator (visible
through the chassis
perforation)
yellow on A prefailure event has been detected that
requires (precautionary) service
intervention.
yellow flashing An error was detected that requires service
intervention.
off There is no critical event.
If the event is still acute after a power
cycle, the indicator is activated after the
restart.
The indicator also lights up in standby
mode.
You can find more details on the indicated
errors in the System Event Log (SEL), in
the ServerView Operations Manager or via
the iRMC S4's Web interface.
ID indicator (visible
through the chassis
perforation)
blue on The system has been selected by pressing
the ID button in the front of the server. To
deactivate the indicator, press the button
again.
E CSS indicator yellow on A prefailure event was detected for a CSS
component that you can fix yourself (for
reasons of precaution) with the CSS
concept.
yellow flashing An error was detected that you can fix
yourself with the CSS concept.
off The system is OK.
If the event is still acute after a power
cycle, the indicator is activated after the
restart.
Table 4: Indicators on the I/O panel
For detailed information on the ETERNUS CS800 S6 see PRIMERGY RX2540 M1 manual.
ETERNUS CS800 51
3 Hardware Description
To Next Page
Loading...
