Fujitsu ETERNUS CS800 - Page 72

3.2 Storage Modules
LED name LED status Description
DI (IN) LINK green The link between the DI (IN) port and the source
port has been established.
DI (IN) FAULT amber The ports to remove the mini SAS HD cables
between enclosures from are indicated. This occurs
while a drive enclosure is being added.
amber blinking The ports to connect the cables are indicated. This
occurs while a drive enclosure is being added.
DI (OUT) LINK green The link between the DI (OUT) port and the
destination port has been established.
DI (OUT) FAULT amber The link between the DI (OUT) port and the
destination port is in error status.
amber blinking The ports to connect the cables are indicated. This
occurs while a drive enclosure is being added.
Ready green The I/O module is in normal status.
Identify blinks blue The installation location of the I/O module is
identified according to the instruction that is issued
from ETERNUS Web GUI or ETERNUS CLI.
Fault amber The I/O module is in error status.
Table 15: Status and meanings of each LED (I/O module of the ETERNUS DX100 S3 drive
enclosure)
Power Supply Unit (PSU)
The power supply unit transforms input AC power from a power socket to DC power and
supplies power to each component. Each power supply unit contains fans.
72 ETERNUS CS800