3.5"hard drive carriers
3.5" hard drive carriers are used in the storage modules. There are two LED indicators for
each hard drive carrier (see the figure below).
Figure 46: 3.5" Hard Drive Carrier
Item Colour Description
1 green HDD BUSY
l Lights up: HDD in active phase
l Does not light: HDD inactive (drive inactive)
2 orange HDD FAULT
l Does not light: no HDD error
l Lights up: HDD faulty or rebuild stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
Table 18: 3.5" Hard Drive Disk Indicator
If a drive fails, you will be notified by an admin alert in the remote management
pages (see "Admin Alerts" on page 433).
ETERNUS CS800 75
3 Hardware Description
To Next Page
Loading...
