Mounting the rail systems
Figure 53: Fit the Left Support System in the PRIMECENTER Rack
CAUTION!
When using telescopic rails, the rack must be protected against tilting.
1. Identify the right and the left rail (see label or imprint on the rail).
2. Position the rail on the rear left support bracket by inserting the retaining bolts (1).
3. Press the rail together (2).
4. Move the rail outwards until the designated position (grid of support upright) is reached
(3).
The black bolts must lock in the corresponding holes.
5. Press the bracket backwards until the rail engages (4).
ETERNUS CS800 87
5 Installing the ETERNUS CS800 S6 Modules
To Next Page
Loading...
