157
PRIMERGY RX200 S4 User's Guide
4 Connect the provided battery backup unit cable to the battery backup unit.
Connect the battery backup unit cable checking its direction.
Do not connect the cable using excessive force, the connector is weak.
5 Install the battery backup unit in the location where the stud beside the fan unit
is.
1. Remove the cables (SAS cable, LED cable, etc.).
2. Set the battery part of the battery backup unit up, and align the screw holes (two
parts) with the stud locations to install.
Battery backup unit cable
Remove the cables.
[Front]
Installation location
To Next Page
Loading...
