Fujitsu SPARC EnterpriseM3000

2-86 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Setting Group name and privileges
■ Command operation
1. Use the showldapssl(8) command to display the group name.
<Example1> Displays configuration for administrator group.
XSCF> showldapssl group administrator
Administrator Group 1
name: (none)
Administrator Group 2
name: (none)
Administrator Group 3
name: (none)
Administrator Group 4
name: (none)
Administrator Group 5
name: (none)
<Example2> Displays configuration for operator group.
XSCF> showldapssl group operator
Operator Group 1
name: (none)
Operator Group 2
name: (none)
Operator Group 3
name: (none)
Operator Group 4
name: (none)
Operator Group 5
name: (none)
<Example3> Displays configuration for custom group.
XSCF> showldapssl group operator
Custom Group 1
name: (none)
roles: (none)
Custom Group 2
name: (none)
roles: (none)
Custom Group 3
name: (none)
roles: (none)
Custom Group 4
name: (none)
roles: (none)
Custom Group 5
name: (none)
roles: (none)