Fujitsu SPARC EnterpriseM3000

Chapter 2 Setting Up XSCF 2-87
2. Use the setldapssl(8) command to set group name and privileges.
<Example1> Sets administrator group 1.
XSCF> setldapssl group administrator -i 1 name CN=SpSuperAdmin,OU=
Groups,DC=davidc,DC=example2,DC=aCompany,DC=com
<Example2> Sets operator group 1.
XSCF> setldapssl group operator -i 1 name CN=OpGroup1,OU=
SCFTEST,DC=aplle2,DC=local
<Example3> Sets custom group 1.
XSCF> setldapssl group custom -i 1 name CN=CtmGroup1,OU=SCFTEST,DC=
aplle2,DC=local
<Example4> Sets privileges for custom group 1.
XSCF> setldapssl group custom -i 1 roles platadm,platop