Fujitsu SPARC EnterpriseM3000 User Manual

2-114 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
5. Enable https.
For Step 1 - Step 5 above, specify each option using the sethttps(8) command.
Also, when using the XSCF Web, select the appropriate items for each setting.
■ When the XSCF Unit is redundant, the https settings are automatically applied to
the standby XSCF Unit.
b. Using the self CA
1. Construct the self CA for the XSCF.
2. Create a web server private key for the XSCF.
3. Make a web server certificate self-signed by the XSCF.
4. Enable https.
When one option of the sethttps(8) command for the self-authentication is
specified, the settings for Step 1 - Step 3 above are automatically completed at a time.
■ When the XSCF Unit is redundant, the https settings are automatically applied to
the standby XSCF Unit.
TABLE 2-15 lists setting items and the corresponding shell commands.
TABLE 2-15 https Administration
Item Description Shell Command Remarks
Display https
setting
Displays the https settings.
Information on whether https is enabled or
disabled and key states are displayed.
showhttps
Enabling/
disabling
Enables or disables https. sethttps

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English