Fujitsu SPARC EnterpriseM3000 User Manual

2-144 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
TABLE 2-22 lists the settings and the corresponding shell commands.
TABLE 2-22 Mail Administration
Item Description
Shell
Command Remarks
Display SMTP
server settings
Displays SMTP server setting
information.
showsmtp
SMTP server Sets the host name or IP address of the
SMTP server.
setsmtp No default value has been
set.
Only one SMTP server can
be specified.
If you specify a host name
for an SMTP server, the
server name must be
resolvable by DNS server.
Authentication
server
If you enable the Authentication, at the
same time, select the POP authentication
or the SMTP authentication. When you
enable the authentication, specify the
host name or IP address of the
authentication server, user ID, and
password.
setsmtp Default is disable
authentication.
Port number Sets the port number of the SMTP server. setsmtp The default port number of
the SMTP server is 25.
Reply address Sets the mail address to be specified in
the From: header of a mail message.
setsmtp To send an error mail when
there is a problem in the
path to the recipient
address from the mail
server, the mail address is
specified.
Display mail
settings
Displays mail report function setting
information.
showemailreport
Enable/
Disable
Enables or disables the mail report
function.
setemailreport The default setting is
"Disable."
Recipient
address
Sets the recipient address for a mail
message to be sent to the system
administrator.
setemailreport • Multiple addresses can
be specified to up to 255
characters, by using a
comma as the delimiter.
•Include one @ mark per
address. (Ex.
name1@domain1,
name2@domain2,
name3@domain3, ...)

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English