Fujitsu SPARC EnterpriseM3000 User Manual

Chapter 9 How to Use the XSCF Web 9-21
TABLE 9-14 lists the functions for configuring LDAP/SSL. Select
[Settings]-[LDAP/SSL] in the Menu tree.
TABLE 9-14 LDAP/SSL Configuration
Function Remarks
LDAP/SSL server display and configuration When XSCF is as an LDAP/SSL client, enable and
disable the LDAP/SSL. Displays and configures an
LDAP/SSL server, modes, timeout piriod, log,
default settings, and so on.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.
User map display and configuration Displays and configures a user map.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.
Certificate display and configuration Displays, loads, and removes an LDAP/SSL server
certificate.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.
Defaultrole display and configuration Displays and configures privileges for all users
authenticated via LDAP/SSL.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.
Alternative servers display and configuration Displays and configures up to five alternate
LDAP/SSL servers.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.
Groups display and configuration Displays and configures administrator groups,
operator groups, and custom groups.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.
Userdomain display and configuration Displays and configures up to five user domains.
This function is equivalent to the showldapssl(8)
and setldapssl(8) commands.

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English