Fujitsu SPARC EnterpriseM3000 User Manual

2-18 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Host
name/domain
name
Sets a host name and a domain name for the
XSCF Unit.
FQDN cannot be specified for the host
name. A host name can be specified up to 64
characters.
A domain name can be specified up to 254
characters with the host name included,
with label elements delimited by a "."
(period).
A label element can contain alphanumeric
characters (a to z, A to Z, 0 to 9), "-"
(hyphen) and "." (period). Each label
element must always begin with an
alphabetic character and end with an
alphanumeric character. However, you
cannot use a "." (period) in a host name.
sethostname No default setting
has been specified.
Display route Displays the XSCF routing environment as
follows:
Network interface (see
TABLE 2-1),
Destination IP address, Gateway, netmask,
Flags.
The meanings of the Flags are as follows:
U : route is up
H : target is a host
G : use gateway
R : reinstate route for dynamic routing
C : cache entry
! : reject route
showroute
Add/delete
route
Adds a route to or deletes a route from an
XSCF network interface.
Specify the following:
• Network interface
• Destination IP address (Destination)
• Gateway
• netmask
setroute The setting of
routing information
in each interface
can be set up to
eight respectively.
Display DNS Displays XSCF name servers and search
paths.
shownameserver
TABLE 2-2 Network Configuration (Continued)
Item Description Shell Command Remarks

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English