Garmin GPSMAP 700 - Page 13

GPSMAP
®
700 Series Owner’s Manual 9
Charts and 3D Chart Views
Navigation Chart Appearance
Changing the Map Orientation
You can set the perspective of the map in the Navigation chart or the Fishing chart.
NOTE
: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Charts.
2. Complete an action:
Select Navigation Chart > Menu > Navigation Chart Setup > Chart Appearance >
Orientation.
Select Fishing Chart > Menu > Fishing Chart Setup > Chart Appearance > Orientation.
3. Complete an action:
Select North Up to set the top of the map to a north heading.
Select Head Up to set the top of the map according to the heading data received from a
heading sensor, also known as the magnetic heading, or to use GPS heading data. The heading
line appears vertically on the screen.
Select Course Up to set the map so the direction of navigation is always up.
Changing the Map Zoom Detail
You can adjust the amount of detail shown on the map, at different zoom levels, for the Navigation
Chart or the Fishing chart.
NOTE
: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Charts.
2. Complete an action:
Select Navigation Chart > Menu > Navigation Chart Setup > Chart Appearance > Detail.
Select Fishing Chart > Menu > Fishing Chart Setup > Chart Appearance > Detail.
3. Use the slider bar to select a level of detail.
Selecting a World Map
You can use either a basic world map or a shaded relief map on the Navigation chart or the Fishing
chart. These differences are visible only when zoomed out too far to see the detailed charts.
NOTE
: The Fishing chart and shaded relief are available with a preprogrammed BlueChart g2
Vision data card. The basic world map is available on all GPSMAP 700 series chartplotters.
1. From the Home screen, select
Charts.
2. Complete an action:
Select Navigation Chart > Menu > Navigation Chart Setup > Chart Appearance.
Select Fishing Chart > Menu > Fishing Chart Setup > Chart Appearance.
3. Complete an action:
Select World Map > Full to show shaded relief on the chart.
Select World Map > Basic to show basic map data on the chart.
•
•
•
•
•
•
•
•
•
•
•