26 GPSMAP
®
700 Series Owner’s Manual
Combinations
7. Complete an action:
Select Route Leg Details > On to show waypoint velocity made good (VMG) when
navigating a route with more than one leg.
Select Next Turn > Distance to show next-turn data based on distance.
Select Next Turn > Time to show next-turn data based on time.
Select Destination, and select Distance, Time to Destination, or Arrival to indicate how the
destination data appears.
Showing the Compass Tape on a Combination Screen
The compass tape appears in a row across the top of the combination screen. It shows the current
heading, and an indicator that shows the bearing to the desired course appears while navigating.
1. From the Home screen, select
Combinations.
2. Select a combination.
3. Select
Menu > Overlay Numbers.
4. Select
Show Compass Tape.
Using Full-screen View
You can view the content of any combination screen on the full chartplotter screen.
1. From the Home screen, select
Combinations.
2. Select a combination.
3. Touch the screen you want to view on the full chartplotter screen.
4. Select
Stop Pointing to remove the pointer from the screen.
5. Select
Stop Panning to return to the Combinations screen.
•
•
•
•
To Next Page
Loading...
