EasyManua.ls Logo

Gatewing X100UAS - Page 138

Default Icon
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.0 — 138 — 12 October 2012
Prepare for flight
Operational planning
4 Check if the flight area is not near/in:
● Airports, airfields (you need a specific permission to fly here)
● Parachute and parasailing jumping areas
● Winch areas
● Power plants
● High-pressure gas releasing units (in AIP or NOTAM)
● Open-air assembly of persons
● Towns
● Congested areas
● Forbidden airspace, such as: Danger (D), Prohibited (P) and Restricted areas (R) (in
AIP or NOTAM)
5 Visit the flight area in the days before the flight to:
● Define a good launching and landing location
● Check for obstacles in the flight area (power lines, bridges, trees)
● Check if a Visual Line of Sight (VLOS) operation is possible
Obstacle clearances
Definition
Obstacle clearance in a zone requires that no obstacles penetrate that zone.
Obstacles
Obstacles are:
● trees
● buildings
● hills
● antennas
● power and telephone lines
● water
● people
● ...

Table of Contents