Gatewing X100UAS - 19.2.5 Check the elevons and elevon servos; 19.2.6 To check the propeller

2.0 — 147 — 12 October 2012
Prepare for flight
Checks and preparations
2 Make sure each wingtip is firmly attached with two screws to the X100 body.
19.2.5 Check the elevons and elevon servos
If the elevon servos do not work correctly, the X100 will not be able to steer correctly, which
will result in a crash.
1 Make sure the elevons are not damaged or bent.
2 Check the elevon servo's by carefully moving the elevons from a upward position to a
downward position, checking for any irregularities like glitches or cracks.
3 Check if the elevon rods are still well connected to the elevon servo and elevon servo fix
4 Check if the servo nuts are still tightened.
19.2.6 To check the propeller
P REREQUISITES
● Screwdriver
The propeller must be in good condition.
1 Check the propeller blades for damage.
2 Check if the propeller nose is still firmly attached.