Gatewing X100UAS - 19.2.4 Check the wingtips

2.0 — 146 — 12 October 2012
Prepare for flight
Checks and preparations
2 Remove the pitot tube from the silicon tube in the X100 body.
3 Make sure the tube is not bent or broken.
4 Blow into the tube to check if nothing is blocking it.
19.2.4 Check the wingtips
P REREQUISITES
● Screwdriver torx T10
The wingtips must be firmly attached to the X100 body to prevent roll stability problems (wingtip
vortices).
1 Make sure the wingtips are intact.