Gatewing X100UAS - 19.6.4 Check the position of the propeller blades; 19.6.5 Cover the pitot tube

2.0 — 174 — 12 October 2012
Prepare for flight
Launch
2 Make sure the horizon is positioned parallel to the X100 on the artificial horizon indicator.
N
OTE: If the horizon is not positioned parallel, the X100 is not positioned correctly or
there is an sensor malfunction.
19.6.4 Check the position of the propeller blades
P REREQUISITES
● Armed launcher
It is important that the propeller blades are positioned correctly to prevent damage during
launch.
1 Make sure the propeller blades are facing backwards. This way they will not hit the launch
dock during launch.
19.6.5 Cover the pitot tube
P REREQUISITES
● X100 body
● Pitot cover